Automation and remote operation |
Abstract 38 - Bulk Carrier Vessel Tracking Automation – The Dalrymple Bay Use Case |
Jochen Franke |
Frontier Automation |
Big data and predictive analytics |
Abstract 44 - Implementing condition -based wear surface management |
Piero Velletri |
Metso Outotec |
Exploration and geology |
Abstract 11 - Exploration Advances: MinEx CRC’S mission |
Andrew Bailey |
MinEx Crc |
Exploration and geology |
Abstract 66 - Geophysical log applications to geological and geotechnical assessment |
Binzhong Zhou |
CSIRO Mineral Resources |
Exploration and geology |
Abstract 67 - 3D geological model and structural analysis of the Neoarchean to Paleoproterozoic Hamersley Basin, Western Australia |
Nishka Piechocka |
Csiro |
Exploration and geology |
Abstract 74 - A new look at detrital iron deposit geology in the Hamersley Province of Western Australia.pdf |
John Clout |
Clout Mining |
Geostatistics and ore reserve estimation |
Abstract 27 - Reproduction of Inequality Constraint between Iron and Silica for Accurate Production Scheduling |
Sultan Abulkhair |
Nazarbayev University |
Health, safety and environment |
Abstract 28 - A Safer Procedure for Tramp Removal Inside a Primary Crusher – Novel Hydraulic Thermal Lance |
Lucas Ono |
Metso Outotec |
Health, safety and environment |
Abstract 61 - It never rains but it pours: Improving extreme-rainfall resilience in Australia’s iron ore regions |
Jane Hodgkinson |
Csiro |
Machine learning |
Abstract 7 - Application of a Reinforcement Learning AI Solution for Optimisation of Screening Shuttles Control |
Bruno Versiani |
BHP |
Machine learning |
Abstract 8 - How machine learning and cloud computing reinvents the grade control geologist as a decision maker |
Richard Jackson |
Maptek |
Mining |
Abstract 40 - Geophysical blast hole sampling |
Clayton Simpson |
Fortescue Metals Group Ltd |
Mining |
Abstract 59 - Managing Continuous Improvement of Mine to Mill begins with Measurement |
Kimberley Lim |
Hexagon |
Mining |
Abstract 62 - Fused sensors for slope deformation monitoring |
Marc Elmouttie |
CSIRO |
Mining |
Abstract 71 - Improving compliance in mining through an effective geoscientific information management framework |
Meesha Stacker |
acQuire Technology Solutions |
Mining |
Abstract 75 - Microseismic monitoring for open pit slope stability and rock fall detection |
Xun Luo |
Csiro |
New equipment |
Abstract 46 - Efficiency improvement of iron beneficiation plant by special fine particle separator |
Mehdi Lak |
Fakoor Meghnatis Spadana |
New equipment |
Abstract 47 - Development of a rail-running pipe conveyor for the iron ore industry |
Michael Carr |
The University Of Newcastle |
New equipment |
Abstract 6 - Dealing with uncertainties on mining equipment fleet planning and usage |
Igor Resende Souza |
Vale S.A |
New equipment |
Abstract 72 - Improving drill productivity and delivering better geophysical data faster |
Darren Palmer |
RIG Technologies |
Ore characterisation and geometallurgy |
Abstract 1 - Transformation of Automated Optical Image Analysis Software Mineral4/Recognition4 to Mineral5/Recognition5 |
Eugene Donskoi |
Csiro |
Ore characterisation and geometallurgy |
Abstract 10 - Mineral Chemistry of Iron Oxides in the Leveäniemi Iron Ore Deposit in Northern Sweden |
Adrian Larsson |
Lkab |
Ore characterisation and geometallurgy |
Abstract 19 - Influence of the occurrence state of Al2O3 on the metallurgical performance of product sinter |
Jian Pan |
Central South University |
Ore characterisation and geometallurgy |
Abstract 26 - Liberation characteristics of comminuted ore types of the Per Geijer iron-oxide apatite deposits |
Patrick Krolop |
TU Bergakademie Freiberg / LKAB |
Ore characterisation and geometallurgy |
Abstract 43 - Advances in Downhole Assay Measurements and Calibration Techniques |
Jennifer Market |
Mpc Kinetic |
Ore characterisation and geometallurgy |
Abstract 54 - Characterisation of SFCA Phases in Iron Ore Sinter by Combined Optical Microscopy and EPMA |
Sarath Hapugoda |
Csiro |
Ore characterisation and geometallurgy |
Abstract 63 - Spatial distribution of major, minor and trace elements in Iron Ores, using micro-XRF technology |
Naomi Potter |
Portable Spectral Services |
Ore characterisation and geometallurgy |
Abstract 9 - Design of a Sintering Heat Profile for Accelerating Oxidation of Magnetite Ore |
Yuki Konno |
Tohoku University |
Processing and beneficiation |
Abstract 14 - Fundamental Study for Biomass Char Utilization at Sintering Process in View of Combustion Property |
Masaru Matsumura |
Tohoku University |
Processing and beneficiation |
Abstract 15 - A Novel Application of Gravity Separation Technology to Beneficiate Ultrafine Iron Ore |
Maruf Hasan |
Mineral Technologies |
Processing and beneficiation |
Abstract 18 - Acceleration of Oxidation Reaction of Iron-bearing Materials by using Biomass char in Sintering Bed |
Taichi Murakami |
Tohoku University |
Processing and beneficiation |
Abstract 21 - Molecular modelling applied to the flotation of iron ores |
Juliette Lainé |
Université De Lorraine |
Processing and beneficiation |
Abstract 25 - Maximising Resource Utilisation in SA – The BIF Story |
Ashma Singh |
Mintek |
Processing and beneficiation |
Abstract 3 - Mining Iron Ore from Tailings with Minimal Use of Process Water |
Yee-kwong Leong |
Yee-kwong Leong, Professor |
Processing and beneficiation |
Abstract 37 - Beneficiation Strategies for Removal of Silica and Alumina from Low-Grade Iron Ores |
Venkata Nunna |
Csiro |
Processing and beneficiation |
Abstract 45 - Real time phosphorus analysis using GEOSCAN analysers at Assmang Khumani Mine in the Northern Cape |
Luke Balzan |
Scantech International |
Processing and beneficiation |
Abstract 49 - Testing and modelling of diverse iron ore slurries for pipeline friction and pump head derate |
Robert Visintainer |
GIW Industries Inc. |
Processing and beneficiation |
Abstract 50 - Application of Cold Bonding Technology to High Grade Iron Ore Concentrate |
Francois Lavoie |
Quebec Iron Ore |
Processing and beneficiation |
Abstract 53 - Ancient to Modern Ironmaking: Effect of Calcium Oxalate |
Sarath Hapugoda |
Csiro |
Processing and beneficiation |
Abstract 56 - REFLUX vs Hydraulic classifier: A comparative analysis for hematite concentrate cleaning |
Francois Lavoie |
Quebec Iron Ore |
Processing and beneficiation |
Abstract 64 - Understanding of dry particle separation using DEM simulation |
Manoj Khanal |
Csiro |
Processing and beneficiation |
Abstract 68 - Where DEM and SPH Collide - Wet Screening Optimisation with Numeric Tools |
Jens Plinke |
Tunra Bulk Solids |
Processing and beneficiation |
Abstract 80 - Dry Concentration of Low Grade Magnetic Iron Ores |
Bob Kelly |
Cyclomag P/L |
Project development and optimisation |
Abstract 20 - Utilization of Energy Sources other than Coke in the Sintering Process |
Yuji Iwami |
JFE Steel Corporation |
Project development and optimisation |
Abstract 48 - Improved sustainability through WHIMS Plant addition at Roy Hill |
Matthysen Hartmann |
Roy Hill |
Sustainability and climate change |
Abstract 23 - Lime Magnetite Pellets - An Alternative Iron Ore Feedstock for Lower Carbon Footprint Ironmaking |
Suneeti Purohit |
Csiro |
Sustainability and climate change |
Abstract 24 - Solar Processing of Iron Ores |
Suneeti Purohot |
Csiro |
Sustainability and climate change |
Abstract 34 - Replacement of PCI with hydrogen and its impact on blast furnace internal conditions |
Nathan Barrett |
Centre For Ironmaking Materials Research (cimr) |
Sustainability and climate change |
Abstract 4 - The production of green steel via HIsmelt |
Neil Goodman |
Smelt Tech Consulting |
Sustainability and climate change |
Abstract 78 - Ultra-Low Emissions, Sintering and the additional benefit of using Fortescue Ores |
Geoff Beros |
FMG |
Tailings |
Abstract 51 - Efficiency improvement of Jalal Abad Beneficiation Plant by Concentrate quality enhancement and Tailing Recovery |
Mehrshad Asghari |
Fakoor Meghnatis Spadana |
Tailings |
Abstract 52 - Design considerations for an iron tailings filtration plant and their conveying and disposal systems |
Jorge Barrera |
Fluor |
Tailings |
Abstract 76 - Processing of unsaleable ultrafines to potentially reduce the volume of iron ore tailings |
Elardus Mare |
Sedgman |
Technical marketing |
Abstract 29 - Sinter analogues mineralogy by different heating conditions |
Thi Bang Tuyen Nguyen |
University Of Newcastle |
Technical marketing |
Abstract 30 - Analyses of Pressure drop in High Temperature Zone during Iron Ore Sintering |
Tejbir Singh |
Centre for Ironmaking Materials Research, University Of Newcastle |
Technical marketing |
Abstract 58 - Penetration Behavior of Initial Sinter Melt into Natural Iron Ore Substrates |
Liming Lu |
Csiro |
Technical marketing |
Abstract 79 - High Temperature Characteristics of Different Types of Blast Furnace Ferrous Materials |
Liming Lu |
Csiro |
|
Abstract 82 - Iron-ore Tailings dams’ disasters – A review |
Kaushika Hazarika |
Roy Hill |
|
Abstract 83 - Challenges in Designing a Magnetic Resonance Logging-While-Drilling Tool for Iron Ore Exploration |
Keelan O'Neill |
University Western Australia |