The Ernest Henry Mine is an open pit copper-gold mining operation located in north-west Queensland, Australia. It is owned and operated by Xstrata Copper with a current concentrator throughput of approximately ten million tonnes per annum. The pit will cease mining towards the end of 2010. Extensive surface diamond drilling has confirmed an extension of the orebody to depths of 1000 m below surface._x000D_
A prefeasibility study was commissioned in late 2006 to investigate underground mining options with the preferred mining method being an inclined sublevel cave. In February 2008 mining of a decline commenced in conjunction with a feasibility study to further investigate the project._x000D_
Work from the prefeasibility study indicates that an underground crusher, conveyor and hoisting shaft could be utilised to crush and transport broken ore from the sublevel cave workings to the concentrator. The study suggests that a production rate of five million tonnes per annum could be achieved and sustained for up to ten years._x000D_
Ventilation designs and requirements will form a large section of the feasibility study. This paper will detail investigations of preliminary ventilation network designs of the proposed sublevel cave. Work has been completed using both Ventsim and VumA ventilation simulation packages._x000D_
Ventsim was used to provide preliminary estimations and suggest alternatives for: surface fan duties; airflow characteristics (direction, velocity, pressure and quantity); and ventilation network design in key mine areas._x000D_
With mining activities reaching depths in excess of 1000 m below surface an analysis of heat conditions should be conducted. The VumA software package was used to model the thermal properties of the ventilation system. This model will provide a basis for the preliminary decisions on refrigeration requirements for the mine._x000D_
FORMAL CITATION:Allnutt, J, 2008. Ventilation design for Xstrata Copper's Ernest Henry underground project prefeasibility study, in Proceedings New Leaders' 2008, pp 37-44 (The Australasian Institute of Mining and Metallurgy: Melbourne).