On 26 June 2000 a hydraulic fill retaining barricade failed at the Bronzewing mine in Western Australia. The barricade failure resulted in the release of 19 000 m3 of saturated hydraulic fill into the mine, which caused the deaths of three miners. Following this tragic accident, the practices and procedures of mines using hydraulic fills came under intense scrutiny by regulatory bodies and mining companies. At this time, the use of hydraulic fill at Normandy's zinc/copper Scuddles mine was suspended and waste rock became the sole backfill material in use underground._x000D_
By 2003, development of the mine adjacent to Scuddles, Gossan Hill had progressed to a point where a self-supporting fill material was required to enable full recovery of high-grade ore. Cemented hydraulic fill (CHF) was identified as the optimal fill type and work began on designing appropriate management procedures and controls to ensure the safe implementation. This work included definition of the fill properties, plant design and construction, reticulation system design, design of stope barricades and drainage systems and fill placement control and monitoring practices. CHF placement began on 16 July 2004 and has continued to date. Significant operational experience has since been gained in areas including plant performance, fill product quality assurance, barricade construction, stope drainage and in situ performance._x000D_
FORMAL CITATION:Winder, K and Jones, E M, 2008. Introduction of and experience gained with cemented hydraulic fill at the Gossan Hill Mine, Western Australia, in Proceedings Tenth Underground Operators' Conference 2008, pp 23-36 (The Australasian Institute of Mining and Metallurgy: Melbourne).