The mechanism of clay slime flocculation in coal washing circuits is considered and it is concluded that polymer flocculants are most suitable. It was found that the addition of sea water with a polymer flocculant improved flocculation and settling, and it was also found that dilution of a flocculated pulp increased floc size and hence settling rate.In predicting plant consumption of reagent it was found that cylinder tests, or even pilot plant tests, could give erroneous results, particularly on flocculated pulps. Different flocculants may, however, be compared in cylinder tests.For filtration, flocculation with Separan plus sea water was much more beneficial than flocculation with Separan alone.INTRODUCTIONDuring the mining of coal, and its subsequent beneficiation by washing, large quantities of minus 10 mesh material are produced. This fine material, which consists of broken down shales and fine coal, causes difficulties in water clarification circuits, in refuse disposal, and in filtration of fine coal.These difficulties can be largely overcome by flocculation, and this paper discusses the mechanism of flocculation, the methods by which a selection of flocculant may be made from the large number available, and the limitation of the prediction of plant performance from laboratory tests. This work applies particularly to the washeries of The Broken Hill Proprietary Co. Ltd. (B.H.P.) and Australian Iron and Steel Ltd. (A.I. & S.) .