This paper describes a CFD modelling study which was carried out to investigate possible improvements in the design of an alumina precipitator tank at the Jajarm plant of Iran Alumina Company. In particular, the tank has an impeller located very close to the tank bottom, such that it quickly becomes covered with settled solids after a shut-down of the agitator, making it difficult to restart. A CFD model was firstly set up in which the existing design was evaluated in terms of flow pattern, off-bottom suspension and distribution of solids, and power consumption. Further simulations were then carried out to test alternative designs, leading to a recommended design, which maintains good mixing, with the same power consumption and without the use of a low-clearance impeller._x000D_
FORMAL CITATION:Lane, G, Manzoori, A and Shadloo, M T, 2006._x000D_
Improving the performance of precipitator tanks in an alumina refinery using CFD modelling, in Proceedings Metallurgical Plant Design and Operating Strategies 2006, pp 351-366 (The Australasian Institute of Mining and Metallurgy: Melbourne).