The vertical carbon kiln developed by Combustion Air Pty Ltd over 30 years ago was independently tested and proven to be capable of reactivating carbon to 100% of the activity of fresh carbon. The vertical kiln was physically small, simple to operate and the installed cost inexpensive. However, the gold industry needed increased carbon throughput and the Combustion Air design could not be scaled up. Today, rotary kilns are used almost exclusively to reactivate activated carbon in the gold industry. Rotary kilns can reactivate carbon to over 90% that of fresh, but they often do not. Lack of understanding by metallurgists, poor operation and poor maintenance all affect a rotary kilns performance leading to poor reactivation, poor utilisation, short equipment life and ultimately gold losses. The authors have exhaustively investigated rotary carbon kilns and reported how to optimise their operation. Despite this wealth of knowledge, the rotary kiln is not considered the ideal kiln for carbon reactivation. It is unnecessarily large, expensive and problematic to operate and maintain. A variant of the vertical kiln is believed to be ideal. The science is known, it is just a matter of properly engineering the kiln. It can be engineered: for any carbon throughput; to cope with high moisture content carbon, to be physically small, to have no moving parts, to be easy to maintain, to require essentially no operator attention, and to just work. This paper presents how to overcome the heat transfer issues that lead to the failure of the larger throughput Combustion Air vertical kilns and the development of the next generation of vertical kiln.
CITATION:Claflin, J K, La Brooy, S R, Strong, B D and Claflin, A M, 2019. Recalling the vertical carbon kiln to duty, in Proceedings World Gold 2019, pp 143155 (The Australasian Institute of Mining and Metallurgy: Melbourne).